Stainless Steel Dual Flusher with Lifters – 304 SS Keg Coupler Cleaning Attachment – Fits D & S Systems

Description

The Stainless Steel Dual Flusher with Lifters is a professional-grade cleaning attachment designed to streamline the draught line sanitation process. Engineered from 304-grade stainless steel, this tool is highly resistant to the aggressive caustic and acidic chemicals used in professional line cleaning, ensuring a lifetime of service without corrosion or pitting. It is specifically designed to bridge two D-System (American Sankey) or S-System (European Sankey) couplers, allowing you to clean multiple lines simultaneously in a “loop” configuration.

The standout feature of this flusher is the integrated mechanical lifters. These pins are precisely calibrated to engage the internal check valves (balls) of the couplers, holding them open to allow an unobstructed flow of cleaning solution through the entire draught circuit. This eliminates the need to disassemble couplers during routine cleanings, protecting your O-rings from unnecessary wear and tear while ensuring that the “dead zones” inside the coupler body are thoroughly sanitized.

Why Professionals Choose This Flusher:Efficiency is the key to a profitable line cleaning route. This dual flusher allows you to connect two tap lines in series, effectively doubling your cleaning capacity per pump cycle. Because it is built from solid 304 stainless steel rather than chrome-plated brass, it will not leach metallic off-flavors into the lines and can withstand the high-pressure environment of motorized cleaning pumps without leaking or failing.

Pro-Line Cleaning Tip:Before attaching the flusher, ensure the bottom gaskets of your couplers are clean and free of debris. A tight seal against the flusher face is necessary to maintain the pressure required to “scrub” the lines effectively. After the cleaning cycle, always perform a final pH-neutral water rinse through the flusher to remove any residual caustic before reconnecting to the kegs.